Remove Write Protection on USB Drive & Memory Cards

Many times using your portable devices you get errors like the disk is write protected like in the image on the right hand side. So this can happen anytime due to virus attacks or anything can be the cause. So recently I got main from one of my reader namedsoundararajan so he was asking that his 2GB card has become write protected so what he can do, well there are two ways you can try to remove its write protection so check them below.

Firstly I will recommend checking for any physical lock on that card or USB, because many times company’s provide a lock write attached to the card for making it write protected, so check that up make sure its off and than also if you are not able to copy stuff to your card than follow below methods.
Removing Write Protection Using Registry Editor :
Well this is most preferred way of removing write protection as it does not include any formatting of disk or memory card. So you just have to manipulate a .reg key and that’s it.

1. Open Registry Editor by navigating to Star Menu > Run ( on windows 7 search for Run in start Menu ) now type “regedit” and you will see your Registry Editor opened.

2. Now Navigate to the following path :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
Now if you are not able to see the StorageDevicePolicies than no problem just download this.Reg File and double click on it, now restart your computer and you will have Storage DevicePolicies.

3. Now double click on the WriteProtect and make its value 0 and than click OK.

4. Now just close registry editor and restart your computer for changes to take effect, now plug your memory card or USB in and enjoy non write protected memory card.

Removing Write Protection Using Apacer Formatting Utility :
Now if you are not able to remove write protection from your Memory Cards or USB Drives using the above method than you can go for Apacer Formatting method which simply works quit good.

Now this method needs your card or USB Drive to be formatted so make sure that you have copied all the data from your USB Drive to your computer, now follow steps from below and have fun.

1. Download Apacer Formatting Utility to your computer, make sure its not kept inside the USB Drive just keep it anywhere outside where you can remember.

2. Now extract it and than plug your pen drive or memory card in to your computer and than double click on the Start.bat file present inside the folder you just downloaded. Now this step will start formatting your drive or card so let it do its work till you figure out that formatting is done.

3. Now try checking out if your card has been free from the write protection, well this will surely do its job and you can enjoy copying any files or folders to your drive.

So now these two methods will help you in fixing your USB Drive or Memory Card easily, but still if you are unable to remove write protection from your drive than their might be some hardware problem or something, make sure to contact your retailer and get it replaced.

How to make Bootable PENDRIVE from Command

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7/Vista DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Spy Others PC To Secretly Record Their Passwords Which Are Automatically Sent to Your Email

A keylogger is a type of surveillance software (considered to be either software or spyware) that has the capability to record every keystroke you make to a log file, . A keylogger recorder can record instant messages, e-mail, and any information you type at any time using your keyboard.


" REMEMBER TO DISABLE THE ANTIVIRUS WHILE FOLLOWING THE STEPS"
* YOU NEED PHYSICAL ACCESS TO THE VICTIMS PC IF YOU WANT TO SPY HIM.
* OR YOU CAN USE IT IN YOUR PC TO SECRETLY RECORD EVERY PASSWORD YOUR FRIENDS TYPE WHILE USING YOUR PC.

Step 1 Getting the Software


We're going to be using the FREE Keylogger made by Smithy.

1. Download Steel Keylogger by Smithy ( gOTO GOOGLE AND DOWNLOAD THE LATEST VERSION ) { Iam using  Steel Keylogger v 1.1.0.18}
2. Go to the directory that you downloaded Steel to, and extract the archive (right-click > extract here).
3. Put the Steel.exe in a private directory that a thief would not think to look under. Try to put it in a hidden folder, or obscure directory, for example:
    C:\WINDOWS
Then make a folder inside of that called "steel" and throw steel.exe inside of it. You'll end up with:
    C:\WINDOWS\steel\steel.exe

"REMEMBER TO PUT AN EXCEPTION TO STEEL.EXE IN YOUR ANTIVIRUS SO THAT THE ANTIVIRUS WON'T REMOVE IT IN THE FUTURE"


Step 2 Setup and Configuration
Now we're on to edit the preferences to optimize it for our needs. I recommend having a separate email JUST for steel, as it will be filled with logs and images.
1. Run steel.exe by double clicking on it.
2. Go to Options > Preferences.
3. Click Startup and Exit.
4. Click the check boxes for Start in Hidden Mode and Run at System Startup (All Users).
5. Check Hide for when Exit is pressed.


6. Click Security and check Password Protect Unhide, and set your choice of password
7. Click Email and edit the credentials to fit yours. Make sure SSL is enabled. This will ensure that the logs are sent to your email, and your password can't be packet-sniffed.


8. If you want Images sent—I recommend this—check the box and in the drop down, select Every Hour.
9. Go to the Logging tab, and choose if you want a key combo to unhide Steel, or to type a password and cut it to reveal Steel. The choice is all yours.
10. Check Enable Screen Capturing.
11. Set the image quality and interval to what you desire.
12. Click the Save Settings button.

THERE ARE MANY COMMERCIAL kEYLOGGERS AVAILABLE. IF YOU FIND THEM COMFORTABLE TRY TO GET  THEIR FREE FULL VERSION.
EG. (http://monitoring-software-review.toptenreviews.com/)
1. SpyAgent
2. WebWatcher
3. PC Pandora
4. Spector Pro
5. eBlaster
6. Elite Keylogger
7. IamBigBrother
8. Refog Personal Monitor
9. XPCSpy Pro
10. SniperSpy

How to Unlock/Crack Winrar/Winzip Password

Have you ever ended up with a RAR file that was password protected? Maybe you set the password yourself and forgot it! Whatever the case, there are a couple of ways to crack the password on a RAR file if you get lucky.
Basically, there are two standard methods to cracking a password for any program: dictionary attack and brute-force attack. The first generates passwords using word lists from a dictionary and the latter simply searches all possible character combinations.
Obviously, the latter is harder and will take more time. If the password is very complex and doesn’t have any recognizable dictionary word in it, it might simply be impossible ( AS IT MAY TAKE DAYS OR EVEN MONTHS). However, it’s always worth a try.

By using cRACK (for Windows, Win32/Win64 ) . [ http://www.crark.net/ ]:
1. Download latesT version of cRACk


2. Then download Crark GUI wrapper for Windows. (http://www.crark.net/download/crark_gui.zip)



3. Then extract both tools ( cRACk  & Crark GUI wrapper) into the same folder.
( if while extracting the archive ask for password then click cancle because only some files are password protected which are not needed in the process . )


4. Run cRackGUI.exe


5. Choose the required options.
6 . Then click start.



7. Password is cracked ( remember the process takes time)




 There are some more software available but they cost about $20 - 30$. But if you search YOU can get the full versions ( YOu know what i want to say ).
Atomic RAR Password Recovery
The free trial will allow you to recover passwords up to 3 characters in length. If you have a longer password and the program is able to determine the entire password, you will see the 1st three characters followed by asterisks (*).
In this case, you can buy the program and it will unmask all the characters. If it never shows the asterisks, that means it can’t figure out the password and you don’t have to buy it! Nice.
RAR Password Cracker
This is another program that uses both the brute force attack method and the dictionary attack. It’s shareware also, so the free trial has some limitations.
Elcomsoft Advanced Archive Password Recovery

Hack an Ethernet ADSL Router

Almost half of the Internet users across the globe use ADSL routers/modems to connect to the Internet however, most of them are unaware of the fact that it has a serious vulnerability which can easily be exploited even by a noob hacker just like you. In this post I will show you how to exploit a common vulnerability that lies in most ADSL routers so as to gain complete access to the router settings and ISP login details.
Every router comes with a username and password using which it is possible to gain access to the router settings and configure the device. The vulnerability actually lies in theDefault username and password that comes with the factory settings. Usually the routers come preconfigured from the Internet Service provider and hence the users do not bother to change the password later. This makes it possible for the attackers to gain unauthorized access and modify the router settings using a common set of default usernames and passwords. Here is how you can do it.
Before you proceed, you need the following tool in the process
Angry IP Scanner
Here is a detailed information on how to exploit the vulnerability of an ADSL router.
Step-1: Go to www.whatismyipaddress.com. Once the page is loaded you will find your IP address. Note it down.
Step-2: Open Angry IP Scanner, here you will see an option called IP Range: where you need to enter the range of IP address to scan for.
Suppose your IP is 117.192.195.101, you can set the range something as117.192.194.0 to 117.192.200.255 so that there exists atleast 200-300 IP addresses in the range.
Step-3: Go to Tools->Preferences and select the Ports tab. Under Port selectionenter 80 (we need to scan for port 80). Now switch to the Display tab, select the option “Hosts with open ports only” and click on OK.
I have used Angry IP Scanner v3.0 beta-4. If you are using a different version, you need to Go to Options instead of Tools
Step-4: Now click on Start. After a few minutes, the IP scanner will show a list of IPs with Port 80 open as shown in the below image.


Step-5: Now copy any of the IP from the list, paste it in your browser’s address bar and hit enter. A window will popup asking for username and password. Since most users do not change the passwords, it should most likely work with the default username and password. For most routers the default username-password pair will be admin-admin or admin-password.
Just enter the username-password as specified above and hit enter. If you are lucky you should gain access to the router settings page where you can modify any of the router settings. The settings page can vary from router to router. A sample router settings page is shown below
If you do not succeed to gain access, select another IP from the list and repeat the step-5. Atleast 1 out of 5 IPs will have a default password and hence you will surely be able to gain access.
What can an Attacker do by Gaining Access to the Router Settings?
By gaining access to the router settings, it is possible for an attacker to modify any of the router settings which results in the malfunction of the router. As a result the target user’s computer will be disconnected from the Internet. In the worst case the attacker can copy the ISP login details from the router to steal the Internet connection or play any kind of prank with the router settings. So the victim has to reconfigure the router in order to bring it back to action.
The Verdict:
If you are using an ADSL router to connect to the Internet, it is highly recommended that you immediately change your password to prevent any such attacks in the future. Who knows, you may be the next victim of such an attack.
Since the configuration varies from router to router, you need to contact your ISP for details on how to change the password for your model
Warning!
All the information provided in this post are for educational purposes only. Please do not use this information for illegal purposes.

How to hack a wi-fi network

Doesn’t it suck when you see your laptop’s catching so many wi-fi signals but none of them is accessible.. don’t you feel like “I wish I could some how break the password and dive into the deep oceans of the information” I beleive everyone should be able to have free internet. If someday I make it big enough and I’ll be having ample money.. I promise I’ll provide free wifi hotspots all over the places.. “Let there be INTERNET”.. even If I don’t get rich.. I’ll become a politician and would make Internet a Fundemental right to every citizen.. Now that would be something..
That’s enough with the Castles in the air.. now lets get back to reality..
What I can do for you right now is that I can tell you how to hack a wifi network to access Internet.. Some would call it stealing.. some like me won’t..
I’ll call it Sharing.. Sharing is what on which the whole Internet is build upon…
So.. Here’s how we do it..
1) First we need to scan for available wireless networks.
Theres this great tool for windows to do this.. called “NetStumbler” or Kismet for Windows and Linux and KisMac for Mac
Below is a screenshot of NetStumbler.. It will show you a list of all the wireless access points in your range.
It’ll also show how the Wi-fi network is secured..
The two most common encryption types are:
1) WEP
2) WAP
WEP i.e Wire Equivalent Privacy is not consideres as safe as WAP i.e Wireless Application Protocol.
WEP have many flaws that allows a hacker to crack a WEP key easily.. whereas
WAP is currently the most secure and best option to secure a wi-fi network..
It can’t be easily cracked as WEP because the only way to retreive a WAP key is to use a brute-force attack or dictionary atack.
Here I’ll tell you how to Crack WEP
To crack WEP we will be using Live Linux distribution called BackTrack to crack WEP.
BackTrack have lots of preinstalled softwares for this very purpose..
The tools we will be using on Backtrack are:
Kismet – a wireless network detector
airodump – captures packets from a wireless router
aireplay – forges ARP requests
aircrack – decrypts the WEP keys
1) First of all we have to find a wireless access point along with its bssid, essid and channel number. To do this we will run kismet by opening up the terminal and typing in kismet. It may ask you for the appropriate adapter which in my case is ath0. You can see your device’s name by typing in the command iwconfig.

2) To be able to do some of the later things, your wireless adapter must be put into monitor mode. Kismet automatically does this and as long as you keep it open, your wireless adapter will stay in monitor mode.
3) In kismet you will see the flags Y/N/0. Each one stands for a different type of encryption. In our case we will be looking for access points with the WEP encryption. Y=WEP N=OPEN 0=OTHER(usually WAP).
4) Once you find an access point, open a text document and paste in the networks broadcast name (essid), its mac address (bssid) and its channel number. To get the above information, use the arrow keys to select an access point and hit <ENTER> to get more information about it.

5) The next step is to start collecting data from the access point with airodump. Open up a new terminal and start airodump by typing in the command:
airodump-ng -c [channel#] -w [filename] –bssid [bssid] [device]
In the above command airodump-ng starts the program, the channel of your access point goes after -c , the file you wish to output the data goes after -w , and the MAC address of the access point goes after –bssid. The command ends with the device name. Make sure to leave out the brackets.
6) Leave the above running and open another terminal. Next we will generate some fake packets to the target access point so that the speed of the data output will increase. Put in the following command:
aireplay-ng -1 0 -a [bssid] -h 00:11:22:33:44:55:66 -e [essid] [device]
In the above command we are using the airplay-ng program. The -1 tells the program the specific attack we wish to use which in this case is fake authentication with the access point. The 0 cites the delay between attacks, -a is the MAC address of the target access point, -h is your wireless adapters MAC address, -e is the name (essid) of the target access point, and the command ends with the your wireless adapters device name.
7) Now, we will force the target access point to send out a huge amount of packets that we will be able to take advantage of by using them to attempt to crack the WEP key. Once the following command is executed, check your airodump-ng terminal and you should see the ARP packet count to start to increase. The command is:
aireplay-ng -3 -b [bssid] -h 00:11:22:33:44:5:66 [device]
In this command, the -3 tells the program the specific type of attack which in this case is packet injection, -b is the MAC address of the target access point, -h is your wireless adapters MAC address, and the wireless adapter device name goes at the end.
 Once you have collected around 50k-500k packets, you may begin the attempt to break the WEP key. The command to begin the cracking process is:
aircrack-ng -a 1 -b [bssid] -n 128 [filename].ivs
In this command the -a 1 forces the program into the WEP attack mode, the -b is the targets MAC address, and the -n 128 tells the program the WEP key length. If you don’t know the -n , then leave it out. This should crack the WEP key within seconds. The more packets you capture, the bigger chance you have of cracking the WEP key.

I am sure it might have helped.:)

How to Remove Facebook Timeline using Chrome Ext.

Facebook introduced Timeline a way back and it was greeted in a nice manner by many Facebook freaks and we also many Timeline Goodies like creating awesome Facebook Timeline Covers well but there were some complications using it so many people wanted to remove it so that they can get back their original + official Facebook profile layout. So many tweaks were launched to get rid of Timeline but some worked some had some glitches in it so time goes on and now we have a nice, good and permanent solution to remove Facebook Timeline.
TimelineRemove chrome extension does your work instantly just by installing it, you install TimelineRemove extension and rest of the work is done by it automatically. So I just tried it out and here’s the below screenshot I captured with TimelineRemove Off state and than On state. So yes you also get option to switch Timeline back on and Off anytime you want.

So you can see in the above screenshot how this little worthy extension works, well if you are also fed up with your Timeline than you can grab this TimelineRemove Chrome Extension and enjoy your Facebook experience without any Timeline junk.
Just install it and than visit Facebook.com and you will see that automatically your Timeline is removed but if you ever wanted to get back on it just click on this extension and than click on Status Timelineremove and if it turns into red cross that means your Timeline is back and when it is Green arrow than Timeline is disabled.

Share Computer’s Internet Connection with other Devices

 You might be using a Hi Speed dongle for 3G internet access or a Broadband Connection using LAN Cable, if you do not have a Router installed in your home than you cannot access a Internet Connection on your other handheld devices, but with Connectify this can be connected easily with just one click. I have earlier posted about Virtual Router which claims to do this same job well it worked good but now I tried and came across some limitations so I found another good one and its working simply fine for me.“read more”
With Connectify you can simply connect unlimited devices to your computers internet connection, pairing is really easy and can be done in few minutes using Wi-Fi. So if you are interested just follow below steps to get it installed and running on your computer.
Follow below steps :
1. Download Connectify Software for your PC.
2. Now after you have downloaded it, just install it in a normal way and after successful installation you will be promoted to Reboot your computer do that its important.
3. Now after Reboot it will automatically start and show window like in the image above, just change the name if you want too and add a 8 digits password.
4. Now choose the internet connection you wanna share I am sharing my MTS 3G Dongle internet connection with my iPhone.
5. So after you have chosen the connection, just pick up how you wanna share your connection the best one is Wi-Fi but if you don’t have than you can choose Bluetooth or any other mentioned.
6. Now just click on Start Hotspot and you Hotspot is ready to be searched and to be connected, just open your mobile Wi-Fi settings menu and search for available connection and you will see the above name you have mentioned displaying just hit that and enter the 8 digits password you kept.
7. Now you are connected with your Internet Connection, so now you can browse or do anything you wanted to do, well you can see how many people are connected in the second window in the above image, that’s just for keeping track on people using your Wi-Fi connection.

How to Crate PDF files Online

Somebody just told you that you need to have Adobe Acrobat (Writer) to create a PDF file? Guess what, you can get away from that pricey piece of software if you just need to convert some documents to pdf, without a need of fancy editing the pdf document.
Here's how. Thanks to the BullZip, who provides a Free Pdf printer. With this free tool, you can simply "print out" your document or webpage to a pdf file, just about the same way as you print it out to a printer.
You can visit BullZip.com for more information about the software.
Here the direct link to BullZip downloads page: Downloads

1. To get started, first follow the link above and download Free Pdf Printer from BullZip, then install it to your computer.
2. Once you're done, you might need to close the program (or the web browser) which you're currently viewing the document. This helps refreshing the list of available printers on your computer.
3. Once you get back to the document you want to convert, perform the same steps are you print out the document, i.e. File > Print ...
4. When you see the Print window pop-up, select "Bullzip PDF Printer" under "Printers", then click "OK".
5. BullZip PDF Printer will then start to analyze your document and display a new pop-up window, where you can direct it to the location you want to save the pdf file.
6. Follow the pop-up windows and.. hola! The PDF document is created

Optimizing your Internet Speed using Internet Cyclon

Internet Cyclone is the tool for your Internet Connection to give it a nice boost, with this you can increase your internet speeds upto 200% as said on their website. Its compatible with all high speed modems like LAN, ISDN, CABLE, DSL, T1, etc. Well its good because it will enhance your overall online experience in Games, watching movies, and other stuff.
Also check out : Accessing Faster Internet with Slow Connection

Download Internet Cyclone Software Windows :
Now do not waste much time and simply download this amazing internet speed optimizing utility for free from
http://en.kioskea.net/download/download-9687-internet-cyclone 
so enjoy easy optimization with this amazing tool.



Facebook ID Finder - Find Full Details of Facebook User

How the Hackers do the Work

As the fraudsters are now becoming more sophisticated in bypassing the Geo-location controls by using proxies (Anonymous IPs) to spoof their IP address, it has become very much necessary to come up with a means for detecting the proxies so that the authenticity of the users can be verified. Using a proxy (web proxy) is the simplest and easiest way to conceal the IP address of an Internet user and maintain the online privacy. However proxies are more widely used by online fraudsters to engage in cyber crimes since it is the easiest way to hide their actual Geo-location such as city/country through a spoofed IP address. Following are some of the examples where fraudsters use the proxies to hide their actual IP.

1. Credit Card Frauds

For example, say a Nigerian fraudster tries to purchase goods online with a stolen credit card for which the billing address is associated with New York. Most credit card merchants use Geo-location to block orders from countries like Nigeria and other high risk countries. So in order to bypass this restriction the credit card fraudster uses a proxy to spoof his IP address so that it appears to have come from New York. The IP address location appears to be legitimate since it is in the same city as the billing address. A proxy check would be needed to flag this order.

2. Bypass Website Country Restrictions

Some website services are restricted to users form only a selected list of countries. For example, a paid survey may be restricted only to countries like United States and Canada. So a user from say China may use a proxy so as to make his IP appear to have come from U.S. so that he can earn from participating in the paid survey.

Proxy Detection Services

So in order to stop such online frauds, Proxy Detection has become a critical component. Today most companies, credit card merchants and websites that deal with e-commerce transactions make use of Proxy Detection Services like MaxMind and FraudLabs to detect the usage of proxy or spoofed IP from users participating online.

Proxy Detection web services allow instant detection of anonymous IP addresses. Even though the use of proxy address by users is not a direct indication of fraudulent behaviour, it can often indicate the intention of the user to hide his or her real IP. In fact, some of the most used ISPs like AOL and MSN are forms of proxies and are used by both good and bad consumers.

How Proxy Detection Works?

Proxy detection services often rely on IP addresses to determine whether or not the IP is a proxy. Merchants can obtain the IP address of the users from the HTTP header on the order that comes into their website. This IP address is sent to the proxy detecting service in real time to confirm it’s authenticity.

The proxy detection services on the other hand compare this IP against a known list of flagged IPs that belong to proxy services. If the IP is not on the list then it is authenticated and the confirmation is sent back to the merchant. Otherwise it is reported to be a suspected proxy. These proxy detection services work continuously to grab a list or range of IPs that are commonly used for proxy services. With this it is possible to tell whether or not a given IP address is a proxy or spoofed IP.

How to Tell Whether a given IP is Real or a Proxy?

There are a few free sites that help you determine whether or not a given IP is a proxy. You can use free services like WhatisMyIPAddress to detect proxy IPs. Just enter the suspected IP in the field and click on “Lookup IP Address” button to check the IP address. If it is a suspected proxy then you will see the results something as follows.

So for all those who think that they can escape by using a spoofed IP, this post is the answer. I hope this information helps. Pass your comments.

How to hack Google

Google serves almost 80 percent of all search queries on the Internet, proving itself as the most popular search engine. However Google makes it possible to reach not only the publicly available information resources, but also gives access to some of the most confidential information that should never have been revealed. In this post I will show how to use Google for exploiting security vulnerabilities within websites. The following are some of the hacks that can be accomplished using Google.

1. Hacking Security Cameras

There exists many security cameras used for monitoring places like parking lots, college campus, road traffic etc. which can be hacked using Google so that you can view the images captured by those cameras in real time. All you have to do is use the following search query in Google. Type in Google search box exactly as follows and hit enter

inurl:"viewframe?mode=motion"

Click on any of the search results (Top 5 recommended) and you will gain access to the live camera which has full controls. You will see something as follows

 

As you can see in the above screenshot, you now have access to the Live cameras which work in real-time. You can also move the cameras in all the four directions, perform actions such as zoom in and zoom out. This camera has really a less refresh rate. But there are other search queries through which you can gain access to other cameras which have faster refresh rates. So to access them just use the following search query.

intitle:"Live View / - AXIS"

Click on any of the search results to access a different set of live cameras. Thus you have hacked Security Cameras using Google.

2. Hacking Personal and Confidential Documents

Using Google it is possible to gain access to an email repository containing CV of hundreds of people which were created when applying for their jobs. The documents containing their Address, Phone, DOB, Education, Work experience etc. can be found just in seconds.

intitle:"curriculum vitae" "phone * * *" "address *" "e-mail"

You can gain access to a list of .xls (excel documents) which contain contact details including email addresses of large group of people. To do so type the following search query and hit enter.

filetype:xls inurl:"e-mail.xls"


Also it’s possible to gain access to documents potentially containing information on bank accounts, financial summaries and credit card numbers using the following search query

intitle:indeo.of finances.xls

3. Hacking Google to gain access to Free Stuffs

Ever wondered how to hack Google for free music or ebooks. Well here is a way to do that. To download free music just enter the following query on google search box and hit enter.

"?intitle:index.of?mp3 eminem"

Now you’ll gain access to the whole index of eminem album where in you can download the songs of your choice. Instead of eminem you can subtitute the name of your favorite album. To search for the ebooks all you have to do is replace “eminem” with your favorite book name. Also replace “mp3″ with “pdf” or “zip” or “rar”.

Hacking the computer with IP address

The following are the IP utilities available in Windows that help in finding out the information about IP Hosts and domains. These are the basic IP Hacking Commands that everyone must know!

Please note that the the term Host used in this article can also be assumed as a Website for simple understanding purpose.

1. PING

PING is a simple application (command) used to determine whether a host is online and available. PING command sends one or more ICMP Echo messages to a specified host requesting a reply. The receiver (Target Host) responds to this ICMP Echo message and returns it back to the sender. This confirms that the Host is online and available. Otherwise the host is said to be unavailable.

Syntax:
C:\>ping gohacking.com

2. TELNET

Telnet command is used to connect to a desired host on a specified port number. For example

Syntax:
C:\>telnet yahoo.com 25
C:\>telnet yahoo.com

NOTE: The default port number is 23. When the port number is not specified the default number is assumed.

3. NSLOOKUP

Many times we think about finding out the IP address of a given site. Say for example google.com, yahoo.com, microsoft.com etc. But how to do this? For this there are some websites that can be used to find out the IP address of a given site. But in Windows we have an inbuilt tool to do this job for us. It is nslookup. Yes this tool can be used for resolving a given domain name into it’s IP address (determine the IP of a given site name). Not only this it can also be used for reverse IP lookup. That is if the IP address is given it determines the corresponding domain name for that IP address.

Syntax:
C:\>nslookup google.com

4. NETSTAT

The netstat command can be used to display the current TCP/IP network connections. For example the following netstat command displays all connections and their corresponding listening port numbers.

Eg: C:\>netstat -a

This command can be used to determine the IP address/Host names of all the applications connected to your computer. If a hacker is connected to your system even the hacker’s IP is displayed. So the netstat command can be used to get an idea of all the active connections to a given system.

Create An Ftp Server On Your PC

Process-1:

First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1) Goto no-ip.com & create urself a free account.

Your Ad Here

2) Now ur account been created & ll receive ur account password via mail to ur email address.
3) After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5) Type any hostname u want (eg:-abc) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.

Your Ad Here

6) Now u have owned ur own static address (example: abc.serveftp.com)
7) Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it from here directly, this is for microsoft window users..
8) After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9) At last tick on da check box present at the static address.
10) U have ur own static web address.

Process-2:

Installation & setting of the FTP-Server
1) You have to install Serv-U 4.1.03 , download this software from here OR Google it.
2) Run Serv-U & use da wizard to setup ur FTP.
3) Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4) Enter ur domain name u have registered (example: abc.serveftp.com) it above in da domain field & click upon next.
5) U ll be asked for anonymous access, select No & click upon next.
6) Next u ll be asked for creating a named account, select yes & click upon next.
7) Choose any user name u wish (eg:-xyz) & clcik upon next.
8) Enter password for dis account (eg:-adc341) for security purpose choose difficult password.
9) U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10) Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11) At last ur account has been created click finish.

Process-3:

Configuring the user accounts which u have been created.
1) On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2) Goto Hide 'Hidden' Files.
3) Check Allow only and enter the number one in the box.
4) Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.
5) choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6) Click upon Dir Access Tab.
7) Now u can c home folder here.Highlight it & make ur permission.
8) If u want only users to download check only these Read,List & Inherit.
9) If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10) If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11) There are many things u can do, These are only the basics....
12) Your server is now ready to be connected..
13) Login with your username & password...

Speed up your internet connection using firefox

1. Type “about:config” into the address bar and hit return. Scroll
down and look for the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests

Normally the browser will make one request to a web page at a time.
When you enable pipelining it will make several at once, which really
speeds up page loading.

2. Alter the entries as follows:

Set “network.http.pipelining” to “true”

Set “network.http.proxy.pipelining” to “true”

Set “network.http.pipelining.maxrequests” to some number like 30. This
means it will make 30 requests at once.

3. Lastly right-click anywhere and select New-> Integer.
Name it “nglayout.initialpaint.delay” and set its value to “0″.
This value is the amount of time the browser waits before it acts on information it recieves.

If you’re using a brodband connection you’ll load pages 2-3 times faster now

Multiple gtalk without software

1. Right-click on the desktop
2. Select New
3. Select Shortcut
4. Paste this into the text box

“c\program files\google\goolge talk\googletalk.exe”/nomutex

5. Click Next

6. Name it whatever: Google Talk Multiple, etc.

7. Click OK until you are done.

Access Facebook.com Using IP Address

To open Facebook using an IP address has its advantages. Chances are that the administrator has blocked Facebook from the Windows host file. Following are the steps involved to open Facebook with an IP address:

1. Open the command prompt and type “Ping facebook.com”

2. You will see the IP address as shown in the above image. Just enter the IP address in the browser address bar and if you are lucky, Facebook may open.

Note: If you do not have administrative rights in the computer and you are unable to open command prompt for any reason, try to find the IP address of Facebook with this Online tool.